Description
100% Brand New
2-Axis Brushless Gimbal Controller
his gimbal controller supported 2-Axis brushless motors and is adjustable, so it can be balanced for camera perfectly.
The original version Brushless Gimbal Controller by Ludwig Färber (Hardware and Software) , Alexander Rehfeldt (Software) and Christian Winkler (Software).
This is an Open Source Project. We add a MOSFET for reverse polarity protection and a status blue LED for status indication.
When you running original firmware (e.g. 049) the LED will show you the startup status.
Hardware Features:
 •2-Axis output supported
 •ATMega328P microcontroller
 •Onboard FT232RL USB-TTL converter
 •Input reverse polarity protection
 •2~6 cells lipo input
 •3 Channels input
 •Power and status LED
 •Multiport
 •UART Port
 •MPU6050 6 axis gyro/accel with Motion Processing Unit (IMU board)
 •On board logic level converter (IMU board)
 •3.3V/500mA LDO voltage regulator (IMU board)
 •Dimension: 50mmx50mm
•Height: 11mm
 •45x45mm mounting holes
 •Weight: 27g (include IMU board)
 
Cable Description: 
German version of the firmware: 
Input: A1 is PITCH (pitch) control, A2 is ROLL (roll) control 
Back screen "PITCH" position represents the pitch axis output, "ROLL" position shows a cross-roller output 
IMU board mounting direction: underside (flat) up, x /-x-axis pointing to the front and rear head direction, y /-y axis pointing to the side of the head 
Russian version of the firmware: 
Input: A0 is PITCH (pitch) control, A1 is ROLL (roll) control 
Back screen "PITCH" position represents the pitch axis output, "ROLL" position shows a cross-roller output 
IMU board mounting direction: IC side up (the plane down), y /-y axis pointing to the front and rear head direction, x /-x-axis pointing to the side of the head 
Size: 
The main control panel: 50 × 50mm Fixed Pitch: 45mm aperture: 3.1mm 
IMU board: 13 × 26mm

  ·IMU board x1
  ·1.25-5Pin cable 300mm x1

Unit Type:
piece
Package Weight:
0.021kg (0.05lb.)
Package Size:
5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in)